Service
Maintenance guide
What should you do when a warning light comes on? A short, clear guide for drivers.
Warning lights
A red light means “stop”; an amber light means “have it checked as soon as possible”. See your owner’s manual for information specific to your vehicle.
Oil pressure
Stop the engine in a safe place immediately. Check the oil level; if the light stays on, do not start the vehicle and call the service.
Engine overheating
Stop and let the engine cool down at idle. Never open the radiator cap on a hot engine.
Brake system / air pressure
Do not continue driving with a brake warning or low air pressure.
Battery / charging
The alternator may not be charging. Switch off unnecessary electrical loads and go to the nearest service.
Engine fault (check engine)
The vehicle will usually still drive, but power may drop. Book an appointment soon to have the fault code read.
AdBlue level / quality
Top up the AdBlue. If the warning continues, the system may limit engine power; stop by the service.
Particulate filter (DPF)
The filter is full. Driving at a steady speed on a suitable road for a while may complete regeneration; if the light stays on, come to the service.
ABS / ESP
The brakes work, but the assistance systems may be disabled. Drive carefully and have it checked.
Habits that extend your vehicle’s life
2 minutes every morning
Tyre pressure and condition, lights, signs of leaks under the vehicle, oil and coolant levels.
Don’t postpone servicing
Delaying oil and filter changes shortens the life of expensive parts such as the turbo and injectors.
Don’t switch off straight away
After a long, loaded journey, let the engine idle for a short while before switching off; this lets the turbo cool down.
Keep records
A vehicle with a regular service history keeps its value, both during the warranty period and when sold second-hand.